Easy-Utility
The Easy-Utility series, developed in diameters 600 – 800 – 1000, was developed for all those cases where the content is to be protected at its best.
The Easy-Utility inspection chamber is ideal to create inspections on electricity, gas, and/or data networks, as well as to host delicate instrumentation such as meters, valves, pumps, etc.
Furthermore, the special rubber seals and the watertight cover allow making the system fully hermetic by preventing – besides the water infiltrations – also the access of rodents and insects which are often a cause of costly failures and disruptions.
Application fields
Electricity, gas, telephone, data networks etc.
Housing of delicate instrumentation such as valves, meters, etc.
Housing of pumps.
Derivazione di servizi
Features
Available dimensions
Serie Easy Easy-Utility:
The inspection chambers of the EASY-UTILITY DN600 series are provided with a flat bottom and are naturally suitable for cabled nets. It is also used whenever it is necessary to store delicate instrumentation, such as valves, flow measuring systems etc … . The flat and reinforced bottom is also suitable to store pumps. The EASY-UTILITY DN600 inspection chamber can be provided with a special watertight cover in PE which makes the system perfectly hermetically sealed.
| CODE | DN (mm) | Description | Outlet DN (mm) | Nr.Ingr. | Scale | Draw | Specific |
|---|---|---|---|---|---|---|---|
| 060-CABLE-080 | 600 | KMC-"Easy Utility" inspection chamber with flat bottom | multi | no | Download | Download |
Grace à ses caractéristiques de résistance et d'étanchéité ainsi qu'à ses multiples prédispositions, le regard Easy¬ Utility DN 800 est la solution la plus appropriée pour protéger les réseaux électriques, de gaz, de données et/ou l'équipement de contrôle.
| CODE | DN | Description | Outlet DN (mm) | Nr.Ingr. | Scale | Draw | Specific |
|---|---|---|---|---|---|---|---|
| 080-CA-XXX-MB | 800 | Regard en polyéthylène KMC "Easy Utility" | multi | no | Download | Download | |
| 080-CAS-XXX-MB | 800 | Regard en polyéthylène KMC "Easy Utility" | multi | yes | Download | Download |
La série Easy-Utility DN 1000 est née pour réaliser des inspections techniques sur des réseaux technologiques. Les particularités sont le fond plat, permettant de travailler aisément à son intérieur, les 4 parois plates qui permettent l'introduction linéaire et les connexions perpendiculaires qui sont typiques de tous les réseaux technologiques, la possibilité d'installer à son intérieur n'importe quel équipement technologique, ou d'y faire passer n'importe quel type de câblage. Le tout garantissant la parfaite étanchéité du système, une résistance statique très élevée et une très grande longévité. .
| CODE | DN | Description | Outlet DN (mm) | Nr.en. | Scale | Draw | Specific |
|---|---|---|---|---|---|---|---|
| 100-CAS-XXX-MB | 1000 | Regard en polyéthylène KMC "Easy Utility" | multi | yes | Download | Download | |
| 100-CA-XXX-MB | 1000 | Regard en polyéthylène KMC "Easy Utility" | multi | no | Download | Download |
Advantages versus the conventional systems
EVERYTHING IS ALWAYS NEAT AND TIDY
Unlike the conventional systems, the Easy-Utility inspection chamber allows installing up to 12 off Ø 125 mm conduits per wall in perfect order. The walls are pierced by means of a Hole saw, and a special seal allows making the system perfectly hermetic.
LONGER AVERAGE LIFE SPAN OF THE NETWORK
Thanks to its resistance and water tightness features, as well as to its multiple settings, the Easy-Utility inspection chamber is the most appropriate solution to protect electricity, gas and data networks and/or the control equipment.
LESS MAINTENANCE REQUIRED
The conventional systems are hardly ever provided with elastic sealing. The water filtering though the soil carries inert with it; this will obstruct the conduits and make them unusable. Furthermore, rodents may enter through these clefts and damage the lines. The Easy-Utility inspection chamber eliminates such issues.
LOWER MANAGEMENT COST
Since the Easy-Utility system can be made fully hermetic, it can host delicate equipment such as valves, meters, etc. Their integrity shall be preserved throughout time, thus reducing the need for replacements. Furthermore, if the Easy-Utility system is used as housing for pumps, its perfectly smooth surface shall allow reducing the cleaning actions and its water tightness shall also cut the energy costs deriving from the need to eliminate the parasite water coming from outside.
The inspection chamber is supplied ready for use; it does not call for heavy means and can be installed in half an hour.
SETTLES THE MATTER
KMC has always been committed in developing products which settle practical matters. Its R&D sector is consistently in contact with the industry operators and collects indications, advice and suggestions to then develop the most appropriate product. The experience accrued on the sewer networks has therefore enabled us to develop the Easy- Utility series, which is dedicated also to the industries of drinking water, gas, energy and telecommunications.
The Easy-Utility series is born to develop technical inspections on technological networks. Its particularities are the flat bottom, which allows working comfortably inside it, the 4 flat walls that make room for linear fittings and perpendicular connections, typical of all the technological networks, the ability to install any technological equipment inside it or to run any kind of wiring through it. All this ensuring the perfect water tightness of the system, very high static resistance and a very long life span.
Why choosing Easy-Utility?
The Easy-Utility series, developed in diameters 600 – 800 – 1000 has been designed to settle the most usual issues of the concrete conventional systems.
The principles utilized by KCM in standardizing such series have been as follows:
Reduced maintenance and purchase cost.
Easy quick installation.
Great static resistance to strss and wear.
Perfect water-tightness.
Compatibility whit the networks which are already implemented and reduced packaging dimension.
Long life span.
Who is the Easy-Utility series for?
Designers who show great sense of responsibility towards their clients, with special attention to the technical, economic and environmental aspects.
Providers of public and/or Private Water Networks who need to perform inspections on their own networks which contain measure instruments, valves, vents, pumps and the like.
Providers of electricity, gas, data and telephone networks who intend to reduce the installation and maintenance costs.
Oil Company Providers who – needing to have inspection chambers that can resist oil and hydrocarbons – want to have their inspection chambers protected against the risks of spillages and environmental damage.
Gallery
